Below mentioned products used with Sharks –Avani System are also available with UL Listing:
- Modbus Converter
- Sounder Cum Strobe
- Repeater Panel
- Addressable Detectors
- Addressable Manual Pull Station
- Addressable Zone Interface Module
- Graphical Software
Microprocessor Based Addressable Fire Alarm System
Conventional Detectors (UL Listed)
Main Features:
- Complies with NFPA 72,
- Both Detectors & Base UL Listed
- Dual LED for 360° visibility
- Advanced detection and communication protocol
- Heat detector with combination of Rate of Rise & Fixed Temperature
- Polarity free wiring
- Low operating current
- Rust free terminals
- Sleek low profile housing design.
2 & 4 Zone Panel
Main Features:
- As per IS-2189 standard
- 16 x 2 Dot Matrix LCD Display
- Operates on 120-220 VAC
- 50Hz supply using SMPS
- Standby battery back up with built in charging
- Tactile key pad for easy panel operation
- Main and Standby status indication
- Low Battery visual warning with audible tone
- Relay output for actuators for fire & fault
- Zone wise one man walk test facility
- Zone wise isolation facility with loop voltage cut off compatible with all types of conventional detectors
4 & 8 Zone UL Listed Panel
Main Features:
- Complies with UL and NFPA-72
- 16 x 2 Dot Matrix LCD Display
- Operates on 120-220 VAC, 50 /60 Hz
- AC main power supply
- Programmable 4/8 class B initiating device circuit (IDC)
- All zones accept smoke detectors and any normally open contact device
- Any zone can be configured as alarm or supervisory zone
- Programmable 2 class B notification appliance circuits (NAC)
- Standby (battery) backup 24V DC power supply with built in charger
- Main & standby status with audible and visual indication
- Battery low visual warning with audible tone
- Form – C relays for fire, fault and supervisory
- Programmable 24 DC output (Resettable/ Uninterrupted)
- RS 485 communication facility (optional)
We get technical and product support from Ravel Electronics Pvt. Ltd. for Microprocessor Based Fire Alarm System